DIY Repurposed Bathroom Vanities

Recycling furniture is an eco-friendly and pocketbook-friendly practice that can result in unique, personalized pieces for your home. When it comes to redecorating your bathroom, you can utilize some simple techniques to turn an old vanity into an entirely different piece of furniture, or else create a new vanity out of a repurposed table, desk, sideboard or dresser. Does this Spark an idea?

Instructions

Repurpose a Vanity

1

Loosen the adhesive caulking between the vanity top and the cabinet base with a chisel. Remove the top.

2

Remove the cabinet doors and hinges and paint or refinish the inside and outside of the cabinet.

3

Apply a bead of adhesive caulk to the top of the cabinet and place a pair of hinged shutters, a large drink tray, a marble slab or any other flat object over the adhesive.

4

Use the vanity as a side table, kitchen island or night stand. Use the cabinet bottom for open storage.

Create a New Vanity

5

Choose an old console table, low sideboard or desk, and a coordinating vessel sink.

6

Place the sink bowl on top of the vanity base. Position it exactly where it will rest. Leave space behind the sink for the faucet. Mark the drain hole and remove the bowl.

7

Cut the drain hole from the furniture with a hole saw of the same diameter. Install the drain system for the sink according to assembly instructions. Connect the drain to the existing drain line.

8

Measure the faucet and cut a notch or hole out of the space behind the sink. Install the faucet and connect the water lines.

9

Screw a towel bar or decorative hardware into the front of the piece.